Amcor PLVM18000INV - Operation Modes; Cooling, Fan, and Dehumidifying Modes; Timer and Sleeping Functions; Compressor and Inverter Technology

Fan mode
Dehumidifying mode
Timer mode
Sleeping mode
7
▲
▲
OPERATION
Cooling mode
- After machine turns on, default value is cooling mode automatic with 22℃ and low fan speed.
- Press “ MODE” to select cooling mode, cooling mode indicator turns on .
- Press “ UP” or “ DOWN” to adjust temperature ( from 16
℃ to 31℃).
- Press “SPEED” to select fan speed( high ,medium and low).
- Press “MODE” to select dehumidifying mode, dehumidifying mode indicator turns on.
- Under dehumidifying mode, sleeping function cannot be setup, and fan speed is low.
- Under dehumidifying mode unit does not have to be vented out.
.
.
- Under standby mode, press “TIMER” to setup the power-on time. Timer indicator turns on.
- Under power-on or stand
by mode press timer key to setup stop / start timer from 1-24.
will cancel the timer.
- While in cooling pressing key “SLEEP” enters into sleeping mode with default value of fan
readjust to a 2℃ increase after 2 hours.
- Sleeping function is not operational under dehumidifying and fan mode.
- There is a 3 minutes compressor start delay after power on or restart.
- Inverter technology is designed for fast and economical cooling.
consumption will be.
- Press “ ” and “ ” key at the same time to see compressor’s working frequency .
Compressor protection
Inverter technology function
- Press “ MODE” to select fan mode, fan mode indicator turns on .
- Press “FAN” to select fan speed(high ,medium and low).
- Temperature and sleeping function cannot be setup.
℃
- Under water full, machine standby and mode change, sleeping mode will be cancelled.