5
OPERATION
GB
Cooling Mode
· After machine turns on, default value is cooling mode with 22ºC and low fan speed.
· Press “MODE” to select cooling mode, cooling mode indictor turns on .
· Press “UP” or “DOWN” to adjust temperature (from 16ºC to 31ºC).
· Press “FAN” to select fan speed (low, high)
Fan Mode
· Press “MODE” to select fan mode, fan mode indicator turns on .
· Press “FAN” to select fan speed (low, high)
· Temperature and sleeping function cannot be setup.
Timer Mode
· Under standby mode, press “TIMER” to setup the power-on time,
press “TIMER
” to adjust the timer (from 1 to 24 hours). Timer indicator turns on.
· Under power-on mode, press “TIMER” to setup power-off timer.
Press “TIMER” to adjust the timer (from 1 to 24 hours). Timer indicator turns on.
Sleeping Mode
· Press key “SLEEP” enter into sleeping mode, default value of fan speed is low.
· When sleeping mode turns on , under cooling mode, the one hour later, setting temperature will go up
1ºC, the second one hour later, setting temperature will go up another 1ºC, and then keep the same;
· Sleeping mode is invalid under dehumidifying and fan mode.
Unde
r water full, machine standby and mode conversion, sleeping mode will be cancelled .
Compressor Protection
· Three minutes later after power on / restart, compressor starts to run.
On/Off
Press “POWER” to switch the unit On or Off
To Next Page
Loading...
