Need help?Do you have a question about the Amcrest IPM-721B and is the answer not in the manual?
Guides users on setting up their camera for first-time use or advanced configuration.
Explains how to set up the camera using Amcrest Cloud and Amcrest View Pro mobile apps.
Details how to add cameras to the Amcrest Surveillance Pro software using direct IP connection.
Details how to configure disk storage for recording footage using the PC-NVR feature.
Explains how to configure recording settings for motion or continuous recording.
Guides on adding Amcrest devices into the Blue Iris surveillance software.
Details setting up stable remote access using UPnP and DDNS functionality.
Provides an alternative method for remote access setup using port forwarding.
Allows configuration of various camera settings including picture, exposure, BLC, WB, and Day/Night modes.
Allows configuration of network settings like TCP/IP, P2P, Connection, ONVIF, DDNS, IP Filter, SMTP, UPnP.
Addresses common issues related to camera not booting up or shutting down unexpectedly.
Troubleshoots issues with distorted video color and non-functional motion detection.
General| Frame Rate | 30 fps |
|---|---|
| Viewing Angle | 90° |
| Night Vision | Yes |
| Storage | MicroSD card (up to 128GB) |
| Power | DC 12V |
| Video Compression | H.264 |
| Motion Detection | Yes |
| Lens | 3.6mm |
| IR LEDs | 12 |
| Wireless | Yes |
| Ethernet | Yes |
| Weatherproof | IP66 |
| Compatibility | ONVIF, Blue Iris |
| Audio | Two-way audio |
To Next Page