Need help?Do you have a question about the Amcrest IP2M-841 and is the answer not in the manual?
Steps to keep the Amcrest camera secure and prevent unauthorized access.
Lists key features like Network Access, Cloud Storage, Advanced Playback, and Protocol Support.
Specifies the default login credentials and recommends changing them for security.
Step-by-step guide for setting up camera WiFi connection using the Amcrest View Pro app.
Instructions to download, install, and use the IP Config software.
Guide to accessing the camera's web interface using IP address and login credentials.
Guide to setting up stable remote access using UPnP and DDNS.
Settings for motion detection and video tampering detection.
Settings for managing storage, including recording schedules and destinations.
Resetting the camera and all its settings to the factory defaults.
Possible reasons and solutions for the camera failing to boot up.
Possible reasons and solutions for the camera unexpectedly shutting down.
Troubleshooting steps when the camera does not recognize an SD card.
Troubleshooting steps for when motion detection fails to function correctly.
Common reasons and solutions for web access issues.
Reasons for unstable network connections and how to resolve them.
Solutions for recovering forgotten login credentials, including factory reset.
General| Resolution | 1080p (1920x1080) |
|---|---|
| Field of View | 90° |
| Audio | Two-way audio |
| Connectivity | Wi-Fi, Ethernet |
| Lens | 3.6mm |
| Frame Rate | 30 fps |
| Video Compression | H.264 |
| Night Vision | Up to 32ft |
| Storage | MicroSD card (up to 128GB) |
| Power Supply | DC 5V/2A |
| Operating Temperature | 14°F to 122°F |
To Next Page