AME 67601 - User Manual

INSTRUCTION MANUAL
AME INTERNATIONAL - 2 - WWW.AMEINTL.NET
Models 67601 & 67751
Break-A-Way Torque Wrench
WARNING: IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING TOOL. IT IS
THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE
INFORMATION IN THIS MANUAL INTO THE HANDS OF THE
OPERATOR. FAILURE TO OBSERVE THE FOLLOWING
WARNINGS COULD RESULT IN INJURY.
WARNING: IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING TOOL. IT IS
THE RESPONSIBILITY OF THE EMPLOYER TO PLACE THE
INFORMATION IN THIS MANUAL INTO THE HANDS OF THE
OPERATOR. FAILURE TO OBSERVE THE FOLLOWING
WARNINGS COULD RESULT IN INJURY.
2347 Circuit Way, Brooksville, Florida, USA 34604
Phone: (+1) 352-799-1111 Toll Phone: (+1) 877-775-4AME (4263)
Fax: (+1) 352-799-1112 E-mail: sales@ameintl.net www.ameintl.net
2347 Circuit Way, Brooksville, Florida, USA 34604
Phone: (+1) 352-799-1111 Toll Phone: (+1) 877-775-4AME (4263)
Fax: (+1) 352-799-1112 E-mail: sales@ameintl.net www.ameintl.net
AME International’s 1-Year Limited Warranty
AME International products are warranted against defects in material
and workmanship for one year from the date of purchase. The product
must be operated, maintained and installed according to the instructions
and procedures provided, or this warranty is void. Any modication or
wrongful use of the product will also void this warranty. AME International’s
obligation under this warranty is limited to the repair or replacement of
defective products. For more information or to inquire about this warranty,
please contact our ofce @ 352-799-1111 or email sales@ameintl.net.

Summary

AME Internationals 1-Year Limited Warranty

Models 67601 & 67751 Break-A-Way Torque Wrench Instructions

Adjusting Torque Measurement

Use a 22 MM wrench to adjust the torque measurement to the desired setting.

Proper Torque Application

Grasp the handle and push downward. A break-away indicates the desired pre-set torque has been met.

Safety Warnings for Use

Do not use the wrench as a hammer or pry bar. Avoid inaccurate torque by not fully removing the nut.

Lubrication and Extension Use

Lubricate three points frequently. Do not install unnecessary extensions to avoid damage or inaccuracy.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The AME International Models 67601 & 67751 are Break-A-Way Torque Wrenches designed for precise torque application, primarily in automotive and heavy-duty applications. This tool is engineered to prevent over-torquing by "breaking away" once the desired torque is achieved, providing a clear tactile and audible indication to the user.

Function Description:

The primary function of the AME Break-A-Way Torque Wrench is to apply a specific, pre-set amount of torque to fasteners, such as nuts and bolts. This is crucial in applications where accurate torque is essential for safety, performance, and preventing damage to components. Unlike click-type torque wrenches that produce an audible click, this "break-a-way" design provides a distinct physical break in the handle's resistance, indicating that the target torque has been met. This mechanism ensures that the operator stops applying force at the precise moment the desired torque is reached, preventing further tightening and potential damage to the fastener or the component being assembled. The wrench is designed for one-way operation, meaning it accurately measures torque when pushing downward.

Important Technical Specifications:

While specific torque ranges are not explicitly stated in the provided manual pages, the visual representation shows a scale with markings up to "230ft.lb," suggesting that the wrench is capable of handling significant torque values, likely suitable for heavy-duty applications such as truck wheels or large machinery. The adjustment mechanism requires a 22 MM wrench, indicating a robust and secure method for setting the desired torque. The tool's construction appears to be durable, designed to withstand the rigors of professional use. The "break-a-way" mechanism is a key technical feature, ensuring consistent and repeatable torque application. The design also incorporates a removable adapter, allowing for flexibility in use with different sockets or extensions.

Usage Features:

1. Torque Adjustment: The desired torque is set using a 22 MM wrench. The manual emphasizes that the handle should align with the desired torque setting on the scale. It also warns against fully removing the adjustment nut to avoid inaccurate torque readings. This precise adjustment allows users to tailor the torque output to specific application requirements.
2. Operation: To apply torque, the user grasps the handle and pushes downward. The "break-a-way" action provides a clear indication that the pre-set torque has been met. This tactile feedback is a critical feature, ensuring that the operator immediately ceases applying force once the target torque is achieved.
3. Adapter Release: The adapter can be released by pushing or pulling from the center of the head. This feature enhances versatility, allowing for quick changes of sockets or other attachments.
4. Safety Warnings: The manual includes prominent warnings emphasizing the importance of reading the manual before operation and placing the information into the hands of the operator. It explicitly states that failure to observe warnings could result in injury.
5. Prohibited Uses: The manual strictly warns against using the wrench as a hammer or a pry bar, as this can damage the tool and compromise its accuracy. It also advises against installing unnecessary extensions to avoid inaccurate torque readings or damage to the tool. These warnings highlight the precision nature of the tool and the need for proper handling.
6. Over-Torquing Prevention: A key usage feature is the inherent design to prevent over-torquing. Once the desired torque is met, the wrench's mechanism "breaks away," and the manual instructs the user not to continue applying pressure. This ensures that fasteners are tightened to the exact specification, preventing damage to threads, components, or the fastener itself.

Maintenance Features:

1. Lubrication: The manual specifies that three points on the wrench should be lubricated frequently. While the exact points are not detailed in text, an illustration clearly indicates the pivot points and the adjustment mechanism as areas requiring lubrication. Regular lubrication is essential for maintaining the smooth operation of the "break-a-way" mechanism, ensuring consistent accuracy, and extending the lifespan of the tool.
2. Warranty: AME International offers a 1-Year Limited Warranty covering defects in material and workmanship from the date of purchase. This warranty is contingent on the product being operated, maintained, and installed according to the provided instructions and procedures. Any modification or wrongful use voids the warranty. The warranty is limited to the repair or replacement of defective products. This indicates that proper maintenance, including lubrication and adherence to usage guidelines, is crucial for warranty validity and the long-term performance of the tool.
3. Contact Information: The manual provides contact information (phone numbers and email) for inquiries regarding the warranty or for general information, facilitating support and maintenance.

In summary, the AME International Models 67601 & 67751 Break-A-Way Torque Wrenches are robust, precision tools designed for accurate torque application in demanding environments. Their "break-a-way" mechanism provides clear feedback, preventing over-torquing, while features like adjustable torque settings and easy adapter release enhance usability. Regular lubrication and adherence to operational guidelines are key to maintaining their accuracy, extending their service life, and ensuring safe operation.

AME 67601 Specifications

General

Brand	AME
Model	67601
Category	Power Tool
Language	English