Ameda
®
Elite
™
Breast Pump
Turn CYCLES dial to
right to MAX.
Center ange on breast
to create seal.
Once milk ows, turn
CYCLES dial to left to help
drain milk. Try half-way,
adjust as needed.
Insert tubing adapter into
pump piston.
If milk ow slows, try for
another let-down. Turn
CYCLES to MAX, then turn
to left to slow speed when
milk is owing. Repeat as
needed.
To turn off, turn VACUUM
dial to left.
Assemble HygieniKit
®.
Tubing Adapter
With suggested start-up settings
QUICK START
QUICK START
Tubing
Adapter Cap
Silicone Diaphragm
Breast Flange
Valve
Bottle
To turn on, turn VACUUM dial
to right to highest comfortable
setting. Try half-way, adjust as
needed.
To Next Page
Need help?
General
