88
to stop, set the pressure lower opening the regulating wheel thoroughly, stop
and rinse like described at .
concerning the winter service, rinse every month or fill up with sterilizing agent.
add some glycerine to the sterilizing agent if needed.
don’t forget to drain the glass pipe of the flowmeter.
2.4.8 AMEL air conditioning and heating system
The Super Maramu 2000 is equipped with 3 air conditioning devices, able to deliver cold or
warm air.
Setting one device is independent of the others. Temperature (of heating or cooling) is set
using the thermostatic control. The Cool / Heat switch has got a medium position who stops
it working.
Important remark :
- in the air conditioning (Cool) position, don’t turn the thermostatic control after
hearing a “clic”,
- in the heating (Heat) position, don’t set the ventilation on “Min”. prefer “Med” or
“Max”.
Pict. 88 – Thermostatic control
Air conditioning systems are :
- in the saloon, under the portside bench. Remove the cushions and the plywood
seating,
- in the forward cabin. Remove the berths’ cushions and unscrew the centre
wheel. It allows to release the seating between portside and starboard, in front of
the bow thruster (it allows access to the drain cock of the chain locker’s flow to
the sump),
- in the aft shower (to bring air conditioning to the aft cabin). Remove the furniture
against the hull.
To Next Page
