Need help?Do you have a question about the Amensolar N3H-X Series and is the answer not in the manual?
Defines the manual's coverage of assembly, installation, maintenance, and failure types.
Specifies that the manual is intended for qualified electricians.
Explains safety and informational symbols like Danger, Warning, Caution, and Note.
Crucial safety guidelines covering high voltage, qualified personnel, and burn hazards.
Covers manual care, accessory use, wiring, disassembly, environment, tools, and capacitor discharge.
Details surge protection devices (SPDs) and lightning protection for PV installations.
Covers battery safety instructions and electrical safety regarding leakage current and grounding.
Explains symbols for Danger, Warning, and Caution related to hazards.
Explains symbols for keeping dry, fragility, and proper storage conditions.
Explains symbols for UL certification, references, and recyclability.
Describes inverter functionality: solar to AC conversion, battery storage, and self-consumption.
Explains system design with BACK-UP versions and wiring rules for neutral lines.
Details operation in Self-use mode based on PV, Grid, and Battery availability.
Details operation in Peak Shift mode based on PV, Grid, and Battery availability.
Details operation in Battery Priority mode based on PV, Grid, and Battery availability.
Lists technical specs for PV input, battery input, and AC output (On-Grid/Back-Up).
Inspect the inverter for visible damage incurred during transportation.
Lists included accessories: screws, CT, modules, and user manual.
Guidelines for mounting: avoid sunlight, flammables, and specify space requirements.
Details drilling holes, lifting, aligning, and securing the inverter on the wall.
How to connect PV modules, including wire gauge, terminals, and safety warnings.
Steps for connecting to the grid: voltage check, cable selection, and terminal connection.
How the inverter delivers power via AC/backup ports based on grid status.
Multiple inverters increase power and share loads; system diagram provided.
Diagram for split-phase parallel connection, showing breakers and CT settings.
Diagram for 120/208V three-phase parallel connection, detailing breakers.
Diagram for 230/400V three-phase parallel connection, showing breaker specifications.
Describes parallel settings: number, master/slave, phase selection.
Lists common parallel errors and their causes (setup, communication).
System diagrams for connecting a generator to the grid or generator port.
Notes on generator start signals, software support, and parallel operation.
Details generator settings: SOC, charge current, cooling time, gen power.
Explains generator control: enable, charge, manual/auto start/stop.
Identifies and explains LCD icons for inverter status, PV, Grid, Battery, Load, Generator, and Settings.
Explains LED states (Green, Yellow, Red) for different operational modes.
Displays PV channel parameters: voltage, current, power, and accumulated energy.
Shows grid parameters: frequency, voltage, current, power, and energy buy/sell.
Displays battery parameters: voltage, current, SOC, temp, power, and accumulated energy.
Shows load parameters: voltage, current, power, and accumulated usage.
Displays generator parameters: voltage, current, and power.
How to enter settings by inputting the default password.
Describes System Setting, Export Options, Backup Enable, and Grid Power Limit.
Details Work Mode (Self Consumption, Peak Shift, Batt Priority) and Export Options.
Further details on Export Options and Advanced Settings.
Explains PV Type, ARC detection, Beep ON/OFF, and Aux Load SOC settings.
Details Peak Shift Time settings and WORKTIME configuration.
Covers Date and Time settings for the inverter.
Select battery type (Lead-Acid/Lithium) and communication (CAN/RS485).
Configures lead-acid/lithium battery voltage, capacity, and protection.
Configures grid parameters: Phase, voltage, and frequency.
Allows selection of different Grid Standards (AU, US, UK, etc.).
Lists available Grid Standards for user selection.
Configures grid response: PWR-VOLT RES, PFC-FREQ RES, Anti-Island.
Displays inverter model, serial number, and software versions.
Interface for performing a factory reset of the inverter.
Guide to installing and setting up the stick logger for WiFi connectivity.
Details logger indicators, normal/abnormal status, and troubleshooting steps.
Explains usage methods and notices for the logger's reset button.
Steps for registering an account on the SOLARMAN Smart APP.
Guide to creating a new plant profile within the SOLARMAN Smart APP.
Instructions to add a logger manually or by scanning its SN.
Steps to configure the logger's network connection, including WiFi setup.
Details connecting to AP network and auto-configuration process.
Navigating the SOLARMAN APP to access and set grid compliance parameters.
Describes over/under-voltage protection parameters and settings for various grid standards.
Details over/under-frequency protection parameters and settings for various grid standards.
Specific grid compliance settings for Puerto Rico, including frequency/voltage.
Describes frequency-active power modes for grid compliance.
Introduces advanced modes: Sell First, Limited Consumption, Zero Export for flexible control.
Details Global Grid Charge, PV Charge Only, and Time-of-use slots.
Explains advanced mode settings interface: Export Options, Advanced Settings.
Interface for advanced settings, including Export Options and Time of Use.
Details advanced modes: Disable, Sell First, Limit Consumption, Zero Export.
Explains advanced controls: Grid Charge, PV Charge Only, Battery First.
Interface for setting Time of Use table for charging/discharging schedules.
Time-of-use settings for battery charging based on SOC and grid availability.
General| Nominal Output Voltage | 220V / 230V |
|---|---|
| Output Voltage | 220V / 230V |
| Frequency | 50/60Hz |
| Cooling Method | Natural Convection |
| Max. Input Voltage | 550V |
| MPPT Voltage Range | 120-500V |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 14A |
| Efficiency | 97.00% |
| Peak Efficiency | 97.50% |
| Communication | RS485, Optional: WiFi/GPRS |
| Protection Degree | IP65 |
| Input Voltage Range | 120-550V |
| Noise Level | <25 dB(A) |
| Protection Features | DC Reverse Polarity Protection, AC Short Circuit Protection, Over Current Protection, Over Voltage Protection, Insulation Monitoring Protection, Temperature Protection |
| Operating Temperature | -25~+60°C |
| Storage Temperature | -40~+70°C |
| Humidity | 0~100% |
| Dimensions | 330*475*152mm |
| Weight | 11.5kg |
To Next Page
