To Next PageTo Next Page
Need help?Do you have a question about the AMERICAN BATTERY ABC11B-120-20 and is the answer not in the manual?
Provides a general overview of the American Battery Charging rectifiers.
Details technical specifications including AC input, output, controls, and environment.
Guidance on selecting an appropriate installation site for the battery charger.
Instructions for mounting the unit using wall cabinets and suitable bolts.
Details on how to route cables to and from the charger cabinet.
Specifies clearance requirements for proper convection cooling.
Procedure for connecting the battery to the charger's output terminals.
Steps for connecting the charger to the AC power source.
Procedure for energizing the charger's AC and DC breakers.
Procedure for adjusting the float voltage setting using a precision voltmeter.
Procedure for adjusting the high-rate voltage setting after float voltage is set.
Procedure for adjusting the current limit setting, with caution for potential damage.
Explains the function and operation of the full-wave bridge rectifier and SCRs.
Describes the role of the printed circuit card (E1) in voltage regulation and current limiting.
Details the theoretical sequence of voltage regulation and current limiting.
Explains the function of the EMI/RFI filter in reducing high-frequency noise.
Describes the multi-alarm board (E3) and its connection for alarms.
Outlines maintenance requirements, noting minimal upkeep due to no moving parts.
Provides steps for fault isolation using diagnostics and checks.
General| Brand | AMERICAN BATTERY |
|---|---|
| Model | ABC11B-120-20 |
| Category | Battery Charger |
| Language | English |
