American DJ Mega Flash DMX

To Next Page

American DJ® - www.americandj.com - Mega Flash DMX™ Instruction Manual Page 2

Unpacking: Thank you for purchasing the Mega Flash DMX™ by

American DJ®. Every Mega Flash DMX™ has been thoroughly tested

and has been shipped in perfect operating condition. Carefully check

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your unit

for damage and be sure all accessories necessary to operate the unit

have arrived intact. In the event damage has been found or parts are

missing, please contact our customer support number for further

instructions. Please do not return this unit to your dealer without first

contacting customer support at the number listed below.

Introduction: To optimize the performance of this product, please

read these operating instructions carefully to familiarize yourself with

the basic operations of this unit. The Mega Flash DMX™ is a 800 watt

strobe, that has a flash rate range of 1 to 15 flashes per second. Up

to 16 units may be linked together and controlled by single controller.

The units’ intensity, and flash rate can be manually adjusted using the

dipswitches.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.americandj.com for any comments

or suggestions. For service related issue please contact American

DJ®. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m.

Pacific Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2610

E-mail: support@americandj..com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or fire, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty.

Please recycle the shipping carton when ever possible.

Mega Flash DMX™ Introduction

User Instructions

2/05

American DJ®

4295 Charter Street

Los Angeles Ca. 90058

www.americandj.com

American DJ ®

Main Page

Need help?

Do you have a question about the American DJ Mega Flash DMX and is the answer not in the manual?

Summary

Mega Flash DMX Introduction

Unpacking

Instructions for checking the carton and unit for damage upon arrival.

Product Introduction

Details the product's capabilities, wattage, flash rate, and control options.

Customer Support Information

Contact details for setup help, questions, and website resources.

Mega Flash DMX Features and Maintenance

Product Features

Lists key features such as lamp type, adjustable rates, and ease of use.

Warranty Registration

Explains the one-year warranty, registration, and service requirements.

Cleaning Instructions

Provides guidance on cleaning the fixture for optimal light output.

Safety Warnings

Lists crucial warnings to prevent electrical shock, fire, and damage.

Mega Flash DMX DMX Setup Guide

Power Supply Check

Ensures the unit's voltage matches the local power supply before operation.

Understanding DMX-512

Explains DMX protocol and its role in communicating with fixtures.

DMX Linking Procedures

Describes how to link multiple DMX fixtures for synchronized control.

Dipswitch Addressing

Explains how dipswitches assign binary values for DMX addressing.

Mega Flash DMX Operation and DMX Control

Assigning DMX Address

Details setting a DMX address by combining dipswitch values.

DMX Cable Requirements

Specifies requirements for DMX cables, connectors, and wiring.

General Operation Modes

Describes stand-alone, sound-active, and DMX controller operation.

Duty Cycle Recommendations

Advises on usage times to prevent overheating and ensure longevity.

Stand Alone and Sound Active Modes

Explains operation using dipswitches for stand-alone or sound-active modes.

Universal DMX Control

Describes controlling the unit using a universal DMX-512 controller.

Mega Flash DMX DMX Mode and Component Replacement

DMX Mode Operation Details

Details controlling the fixture via DMX, including addressing and channels.

Lamp Warning and Precautions

Warns about handling the strobe lamp and cooling time after use.

Replacement Part Caution

Advises using exact replacement parts to avoid damage and voiding warranty.

Current Discharge Warning

Alerts users about stored current and potential electric shock hazards.

Fuse Replacement Guide

Provides step-by-step instructions for replacing the fuse.

Lamp Replacement Guide

Guides on safely replacing the lamp, emphasizing cooling and handling.

Mega Flash DMX Lamp Replacement and DMX Chart

Lamp Replacement Steps

Details disconnecting wires, removing the lamp, and reassembling.

DMX Address Chart

Provides a chart to configure dipswitch settings for specific DMX addresses.

Mega Flash DMX Limited Warranty

Mega Flash DMX Specifications