American DJ Snap Shot LED - User Manual

Snap Shot LED SPECIFICATIONS:
LED: 220 LEDs
Working Position: Any safe working position
Power: 120V/60Hz
Power Draw: 15W
Weight: 4lbs./ 2Kgs.
Dimensions: 12.25”(L) x 10”(W) x 9”(H)
310 x 250 x 230mm
Warranty: 1 Year (365 days)
Unpacking: Thank you for purchasing the Snap Shot LED by American DJ®. Every Snap Shot LED
has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If the carton appears to be dam-
aged, carefully inspect your xture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts are missing, please contact our
toll free customer support number for further instructions. Do not return this unit to your dealer without
rst contacting customer support.
Introduction: The Snap Shot LED is part of American DJ’s continuing pursuit for creating high qual-
ity affordable fixtures. The Snap Shot LED is a simple, small LED strobe. This strobe is light weight
and compact which makes it a great piece for mobile DJ’s, archtectural lighting, or ligting effect. The
flash speed can be adjusted using the knob on the rear of the unit. There are also IN/OUT mono plugs
located at the rear. These plugs are used to connect to other Snap Shot LED’s.

Summary

Snap Shot LED Specifications

LED and Power Details

Details on the number of LEDs, working position, voltage, frequency, and power draw.

Physical and Warranty Information

Information regarding the product's weight, dimensions, and warranty period.

Product Handling and Introduction

Unpacking Instructions

Guidance on checking the shipping carton and fixture for damage upon receipt.

Product Introduction

Overview of the Snap Shot LED as a light-weight, compact strobe for mobile DJs.

Safety and Support Information

Safety Caution

Warning against user serviceable parts and advising to contact support for repairs.

Customer Support Details

Contact information and hours for customer support, including voice, fax, and email.

Manufacturers Limited Warranty

Warranty Coverage and Validation

Details on warranty validity, proof of purchase, and return authorization requirements.

Warranty Terms and Conditions

Conditions voiding the warranty and limitations on implied warranties and liability.

Warranty Periods by Product Type

Specific limited warranty durations for American DJ and American Audio products.

American DJ Snap Shot LED Specifications

General

Light Source	LED
LED Life Expectancy	50, 000 hours
Power Supply	100-240V, 50/60Hz
Input Voltage	AC 100-240V
Mounting	Yoke
Material	Metal/Plastic
Light Source Color	Red, Green, Blue, White & Amber