American Dryer Corp. AD-50 - User Manual

107 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

AD-30 / AD-50

Parts Manual

1987 thru 1991

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: (508) 678-9000 / Fax: (508) 678-9447

E-mail: techsupport@amdry.com

050492 ADC Part No. 450096

Table of Contents

Default Chapter3
- Table of Contents3
- High Security Control Door Assembly6
- AD-50 High Security Control Door Assembly7
- Phase 3 OPL Microprocessor Control Panel Assembly9
- Phase 3 OPL Microprocessor Control Box Assembly11
- Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly12
- Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly13
- Phase 4 OPL Reversing Microprocessor Control Panel Assembly14
- Phase 4 OPL Reversing Microprocessor Control Box Assembly15
- Phase 4 Single Coin Microprocessor Control Panel Assembly16
- Phase 4 Single Coin Microprocessor Control Box Assembly17
- Phase 4 Dual Coin Microprocessor Control Panel Assembly18
- Phase 4 Dual Coin Microprocessor Control Box Assembly19
- Phase 4.1 Single Coin Microprocessor Control Panel Assembly20
- Phase 4.1 Single Coin Microprocessor Control Box Assembly21
- Phase 4.1 Dual Coin Microprocessor Control Panel Assembly22
- Phase 4.1 Dual Coin Microprocessor Control Box Assembly23
- Dual Timer Control Panel Assembly24
- Dual Timer Control Panel Assembly25
- Dual Timer Control Box Assembly27
- Non-Microprocessor Coin Meter Control Panel Assembly29
- Non-Microprocessor Coin Meter Control Box Assembly31
- AD-30/AD-50 Coin Vault Assembly32
- AD-30 Slide Meter Case Assembly33
Slide Meter Control Box Assembly for Models Mfd. with Globar Ignition ONLY34
- Slide Meter Control Box Assembly34
- For Models Mfd. with Direct Spark Ignition (DSI) ONLY35
- For Door Magnet Type Models ONLY39
Front Panel Assembly for Door Magnet Type Models ONLY39
- For Door Latch Type Models ONLY40
  - AD-30 Front Panel Assembly for Door Latch Type Models ONLY40
- For Door Latch Type Models ONLY41
Basket (Tumbler)/Support Assemblies for Models Mfd. with Non-Tapered Ribs ONLY45
- For Models Mfd. with Non-Tapered Ribs ONLY45
Basket (Tumbler)/Support Assemblies for Models Mfd. with Tapered Ribs ONLY46
- AD-30 Drop Lint Door Assembly47
- Drop Lint Door Assembly48
- AD-50 Drop Lint Door Assembly49
- AD-30 Lint Trap Assembly50
- AD-50 Lint Trap Assembly51
- Basket (Tumbler) Bearing Assembly52
- AD-30 Basket (Tumbler) Bearing Assembly53
- AD-50 Basket (Tumbler) Bearing Assembly54
- AD-50 Basket (Tumbler) Bearing Assembly55
- AD-30/AD-50 Idler Bearing Assembly57
- Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly58
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly for Models Mfd. with Non-Tapered Ribs ONLY58
- For Models Mfd. with Non-Tapered Ribs ONLY59
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly for Models Mfd. with Non-Tapered Ribs ONLY62
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly for Models Mfd. with Tapered Ribs ONLY64
- For Models Mfd. with Tapered Ribs ONLY65
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly for Models Mfd. with Tapered Ribs ONLY66
- For Models Mfd. with Tapered Ribs ONLY67
- Sensor Bracket Assemblies68
- Sensor Bracket Assemblies69
- For Models Mfd. with Globar70
Ignition ONLY70
- Standard Non-Hi/Lo Burner Assembly70
Standard Non-Hi/Lo Burner Assembly for Models Mfd. with Globar71
- ADG-30/ADG-50 Hi/Lo Computerized Burner Assembly75
Ignition ONLY71
- For Models Mfd. with Globar75
Ignition ONLY75
ADG-30/ADG-50 Direct Spark Ignition (DSI) Burner Assembly for Models Mfd. with Direct Spark Ignition (DSI) ONLY77
- ADE-30/ADE-50 Electric Oven Assembly78
- For Models Mfd. as of November 12, 199078
  - ADE-30/ADE-50 Electric Oven Assembly79
- For Models Mfd. Prior to November 12, 199080
ADG-30/ADG-50 Sail Switch/Hi-Limit Assemblies for Globar Models and Direct Spark Ignition (DSI) Models ONLY82
- ADG-30/ADG-50 Replacement Coils for 3/8" Non-Hi/Lo Gas Valve for Globar Ignition Models ONLY83
- ADG-30/ADG-50 Replacement Coils for 3/8" Hi/Lo Gas Valve for Globar Ignition Models ONLY84
Microprocessor Reversing Rear Control Box Assembly for Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays85
Dual Timer Reversing Rear Control Box Assembly for Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays86
- Microprocessor Reversing Rear Control Box Assembly87
- For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays87
  - Dual Timer Reversing Rear Control Box Assembly88
- For Models Mfd. with 208 Volt or 230 Volt Controls with Dunco (Struthers-Dunn) Relays88
  - 3-Phase (3Ø) Motor, Electric Relay Panel Assembly89
- For Models Mfd. with 208 Volt or 230 Volt Controls with Furnas Relays89
3-Phase (3Ø) Motor, Electric Relay Panel Assembly for Models Mfd. with 208 Volt or 230 Volt Controls with Telemecanique Relays90
Control/Heat Step down Transformer for Globar Models and High Pressure Motorized Steam Valve Models ONLY91
- Steam Coil Damper Assembly93
- ADS-50 Steam Coil Damper Assembly95
- ADS-30/ADS-50 Steam Coil/Valve Assembly96
- For Motorized Type and Solenoid Type Models ONLY96
- For Models Mfd. as of November 12, 1990104
ADE-30/ADE-50 Electric Oven Component Application Charts for Models Mfd. Prior to November 12, 1990105
- Additional Parts Available106

Need help?

Do you have a question about the American Dryer Corp. AD-50 and is the answer not in the manual?

Summary

AD-30 High Security Control Door Assembly

AD-50 High Security Control Door Assembly

Phase 3 OPL Microprocessor Control Panel Assembly

Phase 3 OPL Microprocessor Control Box Assembly

Diagram and components for the Phase 3 OPL microprocessor control box.

Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly

Phase 4 OPL Non-Reversing Microprocessor Control Box Assembly

Diagram and components for the Phase 4 OPL non-reversing control box.

Dual Timer Control Panel Assembly

Dual Timer Control Box Assembly

Diagram and components for the Dual Timer Control Box.

AD-30 Slide Meter Case Assembly

AD-30 Slide Meter Control Box Assembly (Globar Ignition)

Diagram and parts for AD-30 Slide Meter Control Box with Globar Ignition.

AD-30;AD-50 Main Door Assembly (Magnet Type)

AD-30 Front Panel Assembly (Magnet Type)

Diagram and parts for AD-30 front panel with magnet type latch.

AD-30 Basket (Tumbler);Support Assemblies (Non-Tapered Ribs)

AD-50 Basket (Tumbler);Support Assemblies (Non-Tapered Ribs)

Diagram and parts for AD-50 basket and support with non-tapered ribs.

AD-30 Non-Reversing Motor Mount Assembly (Non-Tapered Ribs)

AD-50 Non-Reversing Motor Mount Assembly (Non-Tapered Ribs)

Diagram and parts for AD-50 non-reversing motor mount assembly.

Sensor Bracket Assemblies

ADG-30 Standard Non-Hi;Lo Burner Assembly (Globar Ignition)

ADG-50 Standard Non-Hi;Lo Burner Assembly (Globar Ignition)

Diagram and parts for ADG-50 standard non-hi/lo burner with Globar ignition.

ADE-30;ADE-50 Electric Oven Assembly (Nov 12, 1990)

ADE-30;ADE-50 Electric Oven Assembly (Prior to Nov 12, 1990)

Diagram and parts for ADE-30/ADE-50 electric oven (pre Nov 12, 1990).

Relay Board Listing

Microprocessor Coin Acceptors Listing

American Dryer Corp. AD-50 Specifications

General

Brand	American Dryer Corp.
Model	AD-50
Category	Dryer
Type	Commercial Dryer
Capacity	50 lb
Phase	1 or 3
Manufacturer	American Dryer Corp.
Voltage	208-240 V
Heating Method	Electric or Gas

Related product manuals

Preview: American Dryer Corp. AD-50V

American Dryer Corp. AD-50V

American Dryer Corp. AD-540

American Dryer Corp. AD-530HS

Preview: American Dryer Corp. AD-285

American Dryer Corp. AD-285

American Dryer Corp. AD-758

Preview: American Dryer Corp. AD-30x2

American Dryer Corp. AD-30x2

Preview: American Dryer Corp. ADG-758

American Dryer Corp. ADG-758

ADG / MLG-170DR

Phase 7 / OPL ensor Activated Fire Extinguishing System D120

Preview: American Dryer Corp. SL50

American Dryer Corp. SL50

American Dryer Corp. ML-122

American Dryer Corp. ML-190