SPEEDDOME ULTRA 8 CAMERA DOME 8200-0600-03, REV. B
INSTALLATION AND SERVICE GUIDE
1 of 30
SpeedDome
®
Ultra 8
Camera Dome
Installation and Service Guide
Figure 1. SpeedDome Ultra Camera Dome
Camera Dome Product Codes
Product Description
ADSDU822N 22X, N, VERSION 1.00, BLACK
ADSDU822P 22X, P, VERSION 1.00, BLACK
ADSDU822WN 22X, N, VERSION 1.00, WHITE
ADSDU822WP 22X, P, VERSION 1.00, WHITE
ADSDU835N 35X, N, DAY/NIGHT, VERSION 1.00, BLACK
ADSDU835P 35X, P, DAY/NIGHT, VERSION 1.00, BLACK
ADSDU835WN 35X, N, DAY/NIGHT, VERSION 1.00, WHITE
ADSDU835WP 35X, P, DAY/NIGHT, VERSION 1.00, WHITE
© 2007 Sensormatic Electronics Corp.
Contents
About this Guide ....................................................1
About the Camera Dome .......................................2
Cable Requirements ..............................................7
Install/Removal Tool for Base with I/O Board........8
Power-Up Routine..................................................8
Synchronizing Domes............................................8
Diagnostic LEDs ....................................................8
Warnings and Cautions .........................................9
Indoor Installation.................................................10
Using the Install/Removal Tool ............................14
Troubleshooting Indoor Domes ...........................16
Parts List for Authorized Users ............................25
Specifications-Indoor Dome.................................27
Declarations .........................................................29
Appendix A: Vicon Wiring Configurations ..........30
About this Guide
This guide explains how to connect the camera
dome to a mounting base and how to service it.
It does not explain how to:
• Determine a mounting location for the camera
dome. The mounting location is determined by
customer requirements; therefore, this
information is provided separately.
• Attach the mounting base. See information
shipped with the base.
• Assemble housings and structures used with
this camera dome. See information shipped with
the housing and structure.
• Program the camera dome. See operator's
guide shipped with the dome.
Mounting
Base
Housing
Eyeball