To Next PageTo Next PageWhat to do if my American Lawn Mower Co. Lawn Mower is hard to push?
If your American Lawn Mower Co. Lawn Mower is hard to push, it could be due to several reasons: * High grass. * The rear of the mower housing and blade dragging in heavy grass. * Cutting height being too low. * The rear of the grass catcher dragging in thick grass. To resolve this, raise the cutting height and empty grass clippings from the grass catcher.
Why is my American Lawn Mower Co. Lawn Mower cutting grass unevenly?
If your American Lawn Mower Co. Lawn Mower is cutting grass unevenly, it may be because the lawn is rough or uneven, or the cutting height is not set properly. Check the mowing area and move the wheels to a higher setting.
How to fix American Lawn Mower Co. Lawn Mower vibrating at higher speed?
If your American Lawn Mower Co. Lawn Mower is vibrating at a higher speed, it could be due to an unbalanced blade or a bent motor shaft. Balance the blade by grinding each cutting edge equally. Stop the motor, remove the battery, and inspect for damage. Have it repaired by an authorized service center before restarting.
General| Brand | American Lawn Mower Co. |
|---|---|
| Model | 50514 |
| Category | Lawn Mower |
| Language | English |
Assemble and adjust the mower handle for proper use and storage.
Attach the grass catcher for collecting clippings during mowing.
Adjust the mower's cutting height for optimal lawn care.
Instructions for safely starting and stopping the electric lawn mower.
Advice for efficient and safe mowing practices.
Guidelines for safely operating the mower on inclines and slopes.
Recommendations for effective mulching of grass clippings.
Process for safely removing and emptying the grass catcher.
Information regarding the lubrication requirements for the mower's bearings.
Step-by-step guide for safely replacing the mower's cutting blade.
Instructions on how to sharpen the mower blade for optimal performance.
Method for checking and ensuring the mower blade is properly balanced.
Guidelines for safely storing the lawn mower when not in use.
