American Standard 6002 Series

To Next Page

7302219-100 Rev. A 6/16

Product names listed herein are trademarks of AS America Inc.

RECOMMENDED TOOLS AND MATERIALS

Safety Glasses Tape Measure Adjustable Wrench Blade Screwdriver Pencil Levels

Thread Sealant 1/4" Ratchet Hole Cutting Equipment

BEFORE YOU BEGIN

SAVE FOR FUTURE USE

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTES:

• Pictures may not exactly define contour of china and components.

• Observe all local plumbing and building codes.

• Refer to local codes and manufacturer’s instructions for flush valve requirements.

• Carefully inspect the new urinal for damage.

• Fixture dimensions are nominal and conform to tolerances by ASME Standard A112.19.2.

• Site preparation may require additional tools and hardware.

Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is

installed properly, please read these instructions carefully before you begin. (Certain installations may require professional

help.) Also be sure your installation conforms to local codes.

6002 SERIES

Top Spud

PINTBROOK URINAL

INSTALLATION INSTRUCTIONS

C/L OF

OUTLET

2" N.P.T.

FEMALE

OUTLET

CONNECTION

FINISHED

FLOOR

FINISHED

WALL

MANUAL

OVERRIDE

BUTTON

SUPPLY

DN 20mm

(3/4" I.P.S.)

419mm

(16-1/2")

366mm

(14-7/16")

13mm

(1/2")

292mm

(11-1/2")

102mm

(4")

364mm

(14-5/16")

108mm to 133mm

(4-1/4" to 5-1/4")

140mm

(5-1/2")

326mm

(12-13/16")

64mm

(2-1/2")

575mm

(22-5/8")

334mm

(13-1/8")

WALL HANGERS

(INCLUDED)

16mm

(5/8")

10mm

(3/8")

102mm

(4")

GASKET

2" N.P.T.

INSIDE THREADS

DETAIL OF OUTLET CONNECTION

FINISHED WALL

432mm (17")

MAXIMUM

610mm (24")

OPTIONAL

TO FINISHED

FLOOR

Need help?

Do you have a question about the American Standard 6002 Series and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Urinal (PINTBROOK URINAL 6002 SERIES)
Flush Valve (Ultima™ Manual Urinal Flush Valve, Piston-Type, 3/4" Top Spud, 0.125 GPF, Model 6045.013)
Usage Features
Maintenance Features

The device is a PINTBROOK URINAL, model 6002 SERIES, manufactured by American Standard. It is designed for commercial use and is intended to be paired with a Urinal Flush Valve, Piston-Type, 3/4" Top Spud, 0.125 GPF, model 6045.013, also from American Standard.

Function Description:

The PINTBROOK URINAL 6002 SERIES is a vitreous china urinal designed for water-efficient flushing in commercial and public restrooms. When combined with the 6045.013 flush valve, it provides a low-flow flushing solution, contributing to water conservation. The urinal is designed for wall-hung installation, with specific rough-in dimensions to ensure proper fit and function. The flush valve is a piston-type mechanism that delivers a precise volume of water per flush.

Important Technical Specifications:

Urinal (PINTBROOK URINAL 6002 SERIES):

Material: Vitreous China.
Rough-in Dimensions:
- Finished Wall to Center of Outlet: 64mm (2-1/2").
- Finished Wall to Center of Supply: 108mm-133mm (4-1/4" to 5-1/4").
- Finished Floor to Center of Outlet: 356mm (14").
- Finished Floor to Center of Supply: 121mm-132mm (4-3/4" to 5-1/4").
- Finished Floor to Top of Urinal: 673mm (26-1/2").
- Finished Floor to Top of Spud: 794mm (31-1/4").
- Overall Height: 572mm (22-1/2").
- Overall Width: 356mm (14").
- Overall Depth (from wall): 381mm (15").
Outlet Connection: 2" N.P.T. inside thread.
Supply Connection: 3/4" Top Spud.
Trap: Integral P-trap.
Mounting: Wall-hung using wall hangers.
Critical Line (C/L) on Vacuum Breaker: Must typically be 6" (152mm) minimum above fixture. Consult local codes for specific details.

Flush Valve (Ultima™ Manual Urinal Flush Valve, Piston-Type, 3/4" Top Spud, 0.125 GPF, Model 6045.013):

Type: Piston-type, manual flush valve.
Spud Size: 3/4" Top Spud.
Flush Volume: 0.125 Gallons Per Flush (GPF).
Operating Pressure:
- Flowing: 25 psi.
- Static: 80 psi.
Flow Requirement: 10 gallons per minute (37.9 L/min).
Compliance: Certified to comply with ASSE 1037 and ADA Compliant.
Water Pressure: Water pressure over 80 psi is not recommended with most plumbing fixtures.
Rough-in Dimensions (Flush Valve):
- Finished Wall to Center Line of Fixture Spud: 38mm-127mm (1-1/2" to 5").
- Finished Wall to Center of Supply: 108mm-133mm (4-1/4" to 5-1/4").
- Finished Floor to Supply: 295mm (11-1/2").
- Finished Floor to Fixture Spud: 135mm (13-1/2").
- Distance from center of supply to center of fixture spud: 121mm ±13mm (4-3/4" ±1/2").

Usage Features:

Water Conservation: The 0.125 GPF flush valve provides significant water savings compared to older, higher-flow urinals, making it suitable for green building initiatives and reducing operational costs.
Manual Operation: The piston-type flush valve is manually operated, ensuring reliable flushing without the need for electronic sensors or power.
Adjustable Supply Stop: The flush valve includes an adjustable supply stop, allowing for fine-tuning of the flush volume to prevent splashing and ensure proper cleansing of the fixture. This adjustment is crucial to match the flow from the valve to the fixture's capacity, preventing overflow.
Retrofit Capability: The flush valve is designed to replace industry standard manual and electronic valves, making it a versatile option for renovations. In many retrofit scenarios, existing wall escutcheons, supply stops, cover tubes, and vacuum breakers may not need replacement.
Left or Right Hand Installation: The flush valve can be oriented for either left or right-hand installation, offering flexibility in restroom design and plumbing configurations.
Durable Construction: Both the urinal and flush valve are constructed from durable materials (vitreous china for the urinal, presumably brass/chrome for the valve) designed for the demands of commercial environments.

Maintenance Features:

Easy Cleaning: The urinal is designed for easy cleaning with mild soapy water and a soft cloth. Harsh detergents, disinfectants, or aerosol cleaning products should be avoided as they may damage the fittings.
Flush Out Supply Lines: Before final installation, the flush valve allows for flushing out the supply lines to remove any debris or sediment that could affect valve performance. This is done by removing the cover and piston, then opening the supply stop.
Piston-Type Mechanism: The piston-type flush valve is known for its reliability and ease of maintenance. Components like the piston can be accessed for cleaning or replacement if needed.
Serviceability: The manual provides detailed instructions for disassembling and reassembling key components of the flush valve, such as the down tube, vacuum breaker, and supply stop, facilitating repairs and maintenance.
Warranty and Support: American Standard provides customer support for parts, service, and warranty issues through toll-free numbers in the United States, Canada, and Mexico, as well as an email address and website.
Unpacking Instructions: The manual emphasizes that some residual water may remain in the valve during shipping, which is normal as products are water tested at the factory. This helps manage customer expectations during unpacking.