American Standard AccuLink Platinum 850 Installation Guide

American Standard AccuLink Platinum 850

24 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

11-HD14D1-9-EN

ACONT850 Installation Guide

AccuLink™ Platinum 850

Communicating Connected Control

ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES

IMPORTANT — This Document is customer property and is to remain with this unit.

These instructions do not cover all variations in systems or provide for every possible contingency to be met in connection with

the installation. Should further information be desired or should particular problems arise which are not covered sufficiently

for the purchaser’s purposes, the matter should be referred to your installing dealer or local distributor.

WORKS WITH

Table of Contents

Other manuals for American Standard AccuLink Platinum 850

User Guide32 pages

Questions and Answers:

C
Caleb BowersSep 12, 2025
Why is my American Standard Thermostat fan not running when set to ON?
- R
  Rebekah ThomasSep 12, 2025
  If your American Standard Thermostat fan is set to ON but not running, it could be because Humidity Control is engaged. If the indoor humidity is higher than the desired setpoint, the blower will cycle off with the equipment. A humidity icon will be displayed on the Fan Mode button when the blower operation is being inhibited due to high humidity. Alternatively, the blower motor may not be functioning, in which case you should check/repair the system.
A
Amber GutierrezSep 13, 2025
Why does my American Standard Thermostat overshoot the set temperature?
- M
  Melanie BuckleySep 13, 2025
  If your American Standard Thermostat overshoots the room temperature when the Heat/Cool setting is changed more than 2°, it could be due to oversized heating/cooling equipment under the current conditions, meaning the Control cannot respond fast enough to prevent overshooting. Compare the heat load calculation to the equipment chosen. It may also be due to an improper location of the Control. Relocate the Control (or use a remote sensor) if the Control is in a “dead” spot with poor or no air circulation.

American Standard AccuLink Platinum 850 Specifications

General

Brand	American Standard
Model	AccuLink Platinum 850
Category	Controller
Language	English