American Standard Cadet PRO 215BA Series User Manual

SAVE FOR FUTURE USE
7301878-100 Rev. 4 8/19
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2019
Cadet
®
PRO 2-piece Toilet
Elongated and Round Front
Models 215AA, 215BA, 215AB, 215BB, 215FA, 215FC, 215CA, 215DA, 215CB, 215DB Series
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
!
NOTE: Pictures may not exactly define contour of china and components.
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read
these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
Wax Ring
Tank To Bowl Gasket
Slow Close Toilet Seat
Water Supply Line
Attachment Handles
with Nuts (2)
Plastic Washers (2)
Bolt Caps (2)
Also includes Standard Bolt Caps (2)
Bowl-To-Floor
Knobs (2)
T-Bolts with
Retainer (2)
EZ-INSTALL KIT INCLUDED WITH TANK
TANK 4188A and 4188B
BOWL 3517A, 3517C, 3517F ELONGATED
BOWL 3517B, 3517D ROUND FRONT
SOLD SEPARATELY
EZ-INSTALL KIT INCLUDED WITH BOWL

American Standard Cadet PRO 215BA Series Specifications

General

Type	Two-Piece
Water Consumption	1.28 GPF
Rough-In Size	12 inches
Color	White
Bowl Shape	Elongated
Material	Vitreous China
ADA Compliant	Yes
Flush Type	Gravity
Flush Rate	1.28 gallons per flush
Warranty	Limited lifetime warranty
Seat Height	16-1/2 inches
Flush Valve Size	3 inch

Summary

Before You Start

Turn Off Water Supply

Procedure to safely shut off the water supply before beginning toilet installation or removal.

Removing Existing Toilet

Steps for safely removing an old toilet, including draining the tank and bowl.

Clean Flange

Instructions for cleaning the toilet flange to ensure a proper seal with the new toilet.

Back-to-Back Installation

Guidance on plumbing considerations for toilets installed back-to-back to prevent siphoning issues.

Toilet Installation Procedure

Bowl to Tank Assembly

Detailed steps for connecting the toilet tank to the bowl, including tightening components.

Water Supply Connection

Instructions for connecting the water supply line to the toilet tank and turning on the water.

Post-Installation Adjustments

Adjust Water Level

Guide on adjusting the water level inside the tank using the float cup mechanism.

Care and Cleaning

Cleaning Instructions

Recommended methods for cleaning the toilet using mild soap and water, with warnings against in-tank cleaners.

Troubleshooting Guide

Common Toilet Issues

Provides common problems like no flush, poor flush, leaks, or rocking, with suggested corrective actions.