American Standard Cadet 270AA Series User Manual

SAVE FOR FUTURE USE
7301967-100 Rev. C
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2013
Cadet
®
2-piece Toilet
Elongated and Round Front
Models 270AA, 270BA, 270AB, 270BB, 270FA, 270FC, 270CA, 270DA, 270CB, 270DB Series
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
!
NOTE: Pictures may not exactly define contour of china and components.
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read
these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
Wax Ring
Tank To Bowl Gasket
Slow Close Toilet Seat
Water Supply Line
Attachment Handles
with Nuts (2)
Plastic Washers (2)
Bolt Caps (2)
Bowl-To-Floor
Knobs (2)
T-Bolts with
Retainer (2)
EZ-INSTALL KIT INCLUDED WITH TANK
TANK 4019 and 4021
BOWL 3717A, 3717C, 3717F ELONGATED
BOWL 3717B, 3717D ROUND FRONT
SOLD SEPARATELY
EZ-INSTALL KIT INCLUDED WITH BOWL

American Standard Cadet 270AA Series Specifications

General

Category	Toilets
Brand	American Standard
Model	Cadet 270AA Series
Type	Two-Piece
Flush Rate	1.6 GPF
Flush Valve Size	3 inch
Bowl Shape	Elongated
Bowl Height	16.5 inches
Rough-In Size	12 inches
Seat Included	No
Material	Vitreous China
Color	White
ADA Compliant	Yes
Flush Type	Gravity
Trapway Size	2 inches

Summary

Toilet Components and Kits

Tank Identification and EZ-Install Kit

Details the specific tank models (4019, 4021) and the included EZ-Install kit components.

Bowl Identification and EZ-Install Kit

Details the specific bowl models (elongated and round front) and their included EZ-Install kit components.

Sold Separately Items

Lists essential toilet accessories that are not included in the main kit and must be purchased separately.

Installation Preparation

Roughing-in Dimensions

Specifies the required distances from the wall to the closet flange centerline for different bowl shapes.

Before You Start and Existing Toilet Removal

Instructions on turning off water, flushing, and cleaning the flange before starting installation.

Back-to-Back Installation Considerations

Guidance on plumbing and venting for back-to-back toilet installations to prevent vacuums.

Installation Steps

Securing the Bowl and Tank

Instructions for applying weight, tightening tank handles, and connecting the water supply line.

Final Adjustments and Maintenance

Water Level Adjustment

Procedure for adjusting the water level inside the tank using the adjustment knob.

Care and Cleaning Guidelines

Recommendations for cleaning the toilet using mild soap and water, with warnings against in-tank cleaners.

Troubleshooting Common Issues

A guide to diagnosing and correcting problems such as flushing issues, leaks, and toilet rocking.