American Standard Madera 2234.015 User Manual

M63
© 2008 AS America Inc.
MADERA™ ELONGATED
FLUSH VALVE TOILET
VITREOUS CHINA
MADERA™ ELONGATED 10" ROUGH
• Flush valve toilet
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 10" roughing-in
• Elongated bowl
• Direct-fed siphon jet action
• Fully glazed 2-1/8" trapway
• 11" x 13" water surface area
• 1-1/2" top spud
• 2 bolt caps
• 100% factory ush tested
❏ 2234.015 Elongated bowl only, top spud
Component Parts:
❏ 047007-0070A Inlet spud (furnished with bowl)
❏ 481310-100 Bolt caps with retainers
(furnished with bowl)
Nominal Dimensions:
768 x 381 x 359mm
(30-1/4" x 15" x 14-1/8")
Recommended working pressure – between
25 psi at valve when ushing and 80 psi static
Fixture only, less seat, bolt caps and ush valve
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
NOTES:
PRODUCT 2234.015 SHOWN.
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM
BREAKER ON FLUSH VALVE, THE PLUMBER MUST VERIFY
DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
229mm
(9)
1-1/2
SPUD
121mm
(4-3/4)
651mm
(25-5/8)
359mm
(14-1/8)
470mm
(18-1/2)
381mm
(15)
346mm
(13-5/8)
127mm
(5)
254mm
(10)
13mm
(1/2)
44mm
(1-3/4)
102mm
(4)
768mm
(30-1/4)
C/L OF SEAT
POST HOLES
140mm (5-1/2)
CENTER
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLY
TO FLUSH VALVE
Revised 11/08
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen
❏ Seat: 5901.100 American Standard Seat
❏ 5901.110 American Standard Seat with EverClean
®
❏ Alternate Seat: 5905.100 Heavy Duty
American Standard Seat
❏ 5905.110 Heavy Duty American Standard Seat with
EverClean
❏ Flush Valve:
❏ American Standard Selectronic
™
#6065.161.002
DC Power (Top Spud)

American Standard Madera 2234.015 Specifications

General

Brand	American Standard
Model	Madera 2234.015
Category	Plumbing Product
Language	English

Summary

MADERA™ ELONGATED 10" ROUGH FLUSH VALVE TOILET

Product Features

Highlights key attributes such as flush type, material, consumption, bowl shape, trapway, and testing.

Model Specifics

Identifies the 2234.015 model as an elongated bowl with a top spud.

Component Parts

Inlet Spud

Part number 047007-0070A for the inlet spud, furnished with the bowl.

Bolt Caps

Part number 481310-100 for bolt caps with retainers, furnished with the bowl.

Specifications and Certifications

Nominal Dimensions

Provides overall dimensions in millimeters and inches: 768 x 381 x 359mm (30-1/4" x 15" x 14-1/8").

Working Pressure

Recommended working pressure is between 25 psi (flushing) and 80 psi (static).

Compliance Certifications

Meets or exceeds ASME A112.19.2 for Vitreous China Fixtures.

Ordering Information and Notes

To Be Specified

Options for color, seat type (Standard, EverClean, Heavy Duty), and flush valve (Selectronic).

Notes

Includes guidance on verifying dimensions for roughing-in and that the flush valve is ordered separately.

Important Dimension Disclaimer

Fixture dimensions are nominal and may vary within ANSI Standard A112.19.2 tolerances.