Need help?Do you have a question about the Ameristar M4THS2212A and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| Voltage | 208/230V |
| Phase | 1 |
| HSPF Rating | 8.2 |
| Compressor Type | Single Stage |
Emphasizes that only trained personnel should service the unit due to high voltage and refrigerant hazards.
Warns about hazards from improper wiring and grounding, requiring qualified personnel.
Discusses R410-A refrigerant pressure and required service equipment, warning of explosion risks.
Lists 11 numbered warnings regarding installation safety, electrical hazards, and refrigerant handling.
Provides 4 numbered warnings covering pump-down, grounding, cord replacement, and flammable gas hazards.
Lists 8 items to check before installation, covering unit inspection, model match, electrical requirements, and piping.
Details required spatial clearances around the indoor and outdoor units for proper operation and installation.
Lists refrigerant charge, pipe sizes, max distance, oil type, and operating temperature ranges for the units.
Warns about explosion and deadly gas hazards during refrigerant handling, brazing, and welding.
Emphasizes the necessity of nitrogen purging during brazing to prevent unit damage and ensure reliability.
Provides instructions and warnings for selecting an appropriate location for the indoor unit.
Gives instructions and warnings for selecting a suitable location for the outdoor unit, considering wind and ventilation.
Guides on connecting a vacuum pump, evacuating the system to a specific micron level, and checking for leaks.
Warns about disconnecting power before access and hazards of improper wiring and grounding.
Lists 11 items to verify before unit testing, covering installation, leaks, insulation, wiring, and grounding.
Lists common error codes, their malfunction types, and recommended actions or dealer contact.
Details common problems like unit not running, mist, sounds, dust, odor, and mode conflicts with possible causes.
To Next Page
