The provided document is an instruction manual for the "Ameriwood Home Carver End Table," model number 5046196PCOM. This end table is a piece of furniture designed for residential use, intended to provide a flat surface and storage in living spaces.
Function Description:
The Ameriwood Home Carver End Table serves as a functional and decorative furniture item. Its primary function is to provide a stable surface for placing items such as lamps, books, beverages, or decorative objects. It also offers an open lower shelf for additional storage or display, contributing to organization within a room. The design appears to be a classic, rectangular end table with four legs and a single open shelf beneath the tabletop. The manual emphasizes its role in supporting specific loads, indicating its utility for holding various household items.
Important Technical Specifications:
While the manual does not list detailed material specifications (e.g., type of wood, finish), it does provide crucial load-bearing capacities:
- Top Panel Load Capacity: 30 lbs. / 13.6 kgs.
- Lower Shelf Load Capacity: 20 lbs. / 9.1 kgs.
These specifications are critical for safe usage, as exceeding these limits could lead to "sagging, instability, product collapse, and/or serious injury." The table's dimensions can be inferred from the assembly diagrams, showing a compact design suitable for placement beside sofas, chairs, or beds. The hardware includes various components like Cam Bolts (TYX0001), Cam Locks (TYX0002), Dowels (TYX0030), and Bolts (TYX0029), which are standard for ready-to-assemble furniture, indicating a construction method that relies on mechanical fasteners and wooden dowels for stability.
Usage Features:
The Carver End Table is designed for straightforward home assembly, a common feature of Ameriwood Home products. The manual highlights several usage-related features:
- Easy Assembly: The "Assembly Difficulty Meter" rates it as "Easy," suggesting it's suitable for individuals with minimal experience in furniture assembly. The estimated assembly time is 1 hour for 1-2 people.
- Cam Lock Fastening System: This system is central to the assembly process, providing secure connections between components. The manual includes detailed instructions on how to properly use cam locks, emphasizing the correct orientation of the cam lock point towards the outer edge.
- Stability and Safety: The product includes warnings about tipping hazards and advises anchoring the unit to a wall stud "if instructed to" (though specific instructions for wall anchoring are not detailed in the provided pages, it's a general safety warning). It also warns against allowing children to climb on the unit and recommends placing heavy items on lower shelves or drawers to improve stability.
- Placement: The "Open your item in the area you plan to keep it for less heavy lifting" tip suggests that the table is intended to be placed in a semi-permanent location once assembled, rather than frequently moved.
- Maintenance: The manual explicitly states, "Do NOT use harsh chemicals or abrasive cleaners on this item," indicating that gentle cleaning methods are required to preserve the finish. It also advises against pushing, pulling, or dragging the furniture to prevent damage.
Maintenance Features:
The manual provides basic maintenance guidelines to ensure the longevity and appearance of the end table:
- Cleaning: Use of harsh chemicals or abrasive cleaners is prohibited. This implies that cleaning should be done with a soft cloth and mild, non-abrasive cleaning solutions, consistent with most furniture finishes.
- Movement: Users are advised "Never push, pull, or drag your furniture." Instead, it should be lifted when moved to prevent damage to the legs, joints, or floor.
- Structural Integrity: The instruction to "Use all the nails provided for the back panel and spread them out equally" and "Back Panel must be used to make sure your unit is sturdy" (though a back panel is not explicitly listed for this specific end table in the parts list, this is a general instruction from the "Helpful Hints" section) underscores the importance of following assembly instructions precisely to maintain the unit's structural integrity.
- Customer Support: The manual emphasizes contacting customer service for help rather than returning the product, indicating a commitment to supporting the product post-purchase. This includes a toll-free number and a website for assistance.
- Product Registration: Users are encouraged to register their product to receive updates, participate in surveys, get exclusive deals, and facilitate quick replacement part service, which can be seen as a proactive maintenance and support feature.
In summary, the Ameriwood Home Carver End Table is a user-friendly, ready-to-assemble furniture piece designed for light-duty use in residential settings, with a strong emphasis on proper assembly and adherence to load limits for safety and durability.
To Next Page
Need help?
General
