Ametek LANDSCAN LSP-HD - Basic Configuration - Line Scanner Tab

7 - 11
Landscan LSP-HDInfrared Linescanning System
Installation Overview
7.2.8 Basic Configuration – Line Scanner tab
1) Select the required Scanner Speedinarangebetween10and150Hz.
2) Enter the Distance from product(thisisthedistancebetweenScannerWindowand
product surface).
3) The Scan Anglecanbealteredbetween40and80degreesandwillbeshowninthe
relevantdisplays.
4) Select the Enable Internal Ambient Temperature Sensor option to display the
ambient temperature of the Scanner.