Need help?Do you have a question about the Ametek LAND LSP HD Series and is the answer not in the manual?
General| Emissivity | 0.1 to 1.0 (programmable) |
|---|---|
| Analog Output | 4-20 mA, 0-10 V |
| Outputs | 4-20 mA, 0-10 V |
| Digital Communication | RS485 |
| Power Supply | 24 V DC |
| Operating Temperature | 0°C to 50°C |
| Environmental Rating | IP65 (NEMA 4) |
| Protection Rating | IP65 (NEMA 4) |
| Spectral Range | 8 to 14 µm |
Introduces the LSPHD Linescanner Head, its variants, and related installation guides.
Describes the LANDSCAN LSPHD SYSTEM's purpose, components, and typical setup.
Explains the detail label on the scanner and how to interpret the model number.
Details common specifications and those for LSPHD 1 and 2 series models.
Details technical specifications for LSPHD 5, 6, and 7 series models.
General guidance on installation, personnel, safety, and mounting requirements.
Step-by-step guide and table for adjusting the scanner's focus distance.
Guidance on scanner placement, target plane parallelism, and scan width calculation.
Formulas for scan width, target path, and target size description.
Presents target size tables for different LSPHD models and related notes.
Using the integral laser for alignment and identifying scan direction.
Discusses vibration, reflections, and method for window compensation.
Details cables, power units, and default network configuration for the system.
Specifies water supply needs, safety, and describes system startup time.
Emphasizes the need for high-quality, dry, and oil-free air supply.
Covers class 2 laser safety warnings, cautions, and label information.
Procedure for using the laser alignment unit and notes on measurement status.
Explains remote and fixed methods for setting emissivity on the scanner.
Tables of typical emissivity values for various LSPHD series and materials.
Procedure for changing scan frequency via internal switch and related safety precautions.
Explains scan line separation, data generation rates, and storage needs.
Explains skew angle, its calculation, and impact on measurements.
Describes the IATS function for monitoring overheating and its operating limits.
Guidance on maintaining air purge systems and cooling systems.
Refers to a separate user guide for blower unit maintenance.
Instructions on how to find the Landscan WCA software version.
Details products covered by 36, 24, and 12-month warranties.
Lists conditions and causes not covered by the manufacturer's warranty.
To Next Page
