Ametek LAND LSP HD Series - LSPHD 5;6;7 Series Specifications

Page 5
User Guide LSPHD Linescanner Head
1.2.4 LSPHD 5 series specications
LSPHD 5FL LSPHD 50* LSPHD 52*
Operatingwavelength 5 µm 5 µm 5 µm
Temperature range 150to750°C
302 to 1382 °F
150to750°C
302 to 1382 °F
500 to 1100 °C
932 to 2012 °F
SystemAccuracy
(1)
(5to95%ofrange)
±2°C/3.6°F ±2°C/3.6°F ±3°C/6.4°F
Focus distance Fixedat1200mm/47in
Targetwidth Target distance
(staticto95%radiance) <1200mm/47in
Target distance
1200 to 3000mm
47to118in
12mm/0.5in
Fieldofviewof100:1(0.01radians)
Repeatability <0.5°C/0.9°F
Temperature Resolution
(2)
Below15%ofrange
(noise) Above 15% of range
≤1.5°C/2.7°F
≤1°C/1.8°F
≤1.5°C/2.7°F
≤1°C/1.8°F
≤2.5°C/4.5°F
≤2.5°C/4.5°F
Scan Angle
(3)
80°
Scan Rate Factoryset 20 Hz 50 Hz 50 Hz
Useradjustable 10 to 150Hz in 1Hz steps
Speed of response
(Tau-linearoutputonrisingedge)
≤5µs
AmbientStability
deltaT[indicated]/deltaT[ambient]
≤2°/10° ≤2°/10° ≤3°/10°
Settling Time
(4)
2 Hours
*LSPHD 50 and LSPHD 52 as per LSPHD 5FLunlessotherwisestated
(1)Includeserrorcorrection.Appliesonly'inapplication'
(2)Nolineaveraging.4LAreducesnoisebyfactor2
(3)Scananglemaybesetintherange40to80°bythePCsoftware
(4)Foroptimumperformance,thethermoelectriccoolertakestimetostabilisethedetectorthermally.Thisprocesstakeslongerathigherambient
temperatures.