Ametek LAND LSP HD Series - 4 Laser Alignment; Laser Safety Warnings and Precautions

Page 19
User Guide LSPHD Linescanner Head
Fig. 6 Laser Warnings
Laser
Specication
Label
Laser Warning
Label
Laser Beam
Projection
Window
Side View
Top View
Bottom View
4 LaserAlignment
WARNING
CLASS 2 Laser Product.
DONOTstareintolaserbeam.(1.0mWmaximumoutputat635nm)
DONOTlookdirectlytowardsthescannerwindow,orintothelaserbeam
during operation.
Ifthelaserisprojectedontoahighlyreectivesurface,DONOTlookatthe
laserstripefromapositionwhereadirect('mirror-like')reectionmayenter
theeye.
WARNING
CLASS 2 Laser Product.
DONOTattempttodisassemblethelaserunitoranyofitsmounting
components.
Embeddedlaserhasamaximumoutputof3mWwithabeamdivergenceof
<5mrad.
CAUTION
Caution-useofcontrolsoradjustmentsorperformanceofproceduresother
thanthosespeciedhereinmayresultinhazardousradiationexposure.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1mW MAX OUTPUT AT 635nm
IEC60825-1: 2001
IMPORTANT:Pleasenoteradiation
safetywarning,wherethissymbol
appears
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1mW MAX OUTPUT AT 635nm
IEC 60825-1:2001