Ametek LAND LSP HD Series - 2.5 Alignment and Scan Direction; Laser Alignment and Scan Direction Identification

Page 14
User GuideLSPHD Linescanner Head
Scan Direction Arrowhead
Scan Direction
Product Pass Direction
Product
LSP Scanner
2.5 Alignment and Scan Direction
EachAMETEKLandLSP HD Head has an integral laser unit that can be used to help align
thescannerduringinstallation.Forinstructionsonhowtousethelaseralignmentunit,
refertoSection4.0ofthisUserGuide.
Tointerpretthescanproleproducedbythescanner,thescandirectionoftheunitmust
beknown.Thescandirectionisindicatedbyanembossedarrowheadcastintothetop
ofthescannercasing(SeeFig.4overleaf).
Thedesignofthescannermountingsensuresthatthescannerwillalwaysbereplacedin
the correct orientation, should the scanner be removed from the application for servicing
etc.
Fig. 4 Scan Direction