Ametek LAND LSP HD Series - Page 19

Page 13
User Guide LSPHD Linescanner Head
2.4.4 LSPHD 5, 6 & 7 Target size table
The nominal Target Size (TS)isgivenby:
• At target distances less than1200mm/47in:
TS = 12mm / 0.47in
or
• At target distances greater than1200mm/47in:
TS = TD / FoV
• LSPHD 5, LSPHD6&LSPHD7 FoV=100:1
TD SW TP
LSPHD 5, LSPHD 6 & LSPHD 7
Target Size
Target Distance Scan Width Target Path 0° Scan angle ±40°(xaxis) ±40°(yaxis)
mm in mm in mm in mm in mm in mm in
200 7.9 394 15.5 261 10.3 12.0 0.47 15.7 0.62 12.0 0.47
500 19.7 898 35.4 653 25.7 12.0 0.47 15.7 0.62 12.0 0.47
750 29.5 1317 51.9 979 38.5 12.0 0.47 15.7 0.62 12.0 0.47
1000 39.4 1737 68.4 1305 51.4 12.0 0.47 17.0 0.67 13.1 0.52
1200 47.2 2073 81.6 1566 61.7 12.0 0.47 20.4 0.80 15.7 0.62
1500 59.1 2576 101.4 1958 77.1 15.0 0.59 25.5 1.00 19.5 0.77
2000 78.7 3415 134.5 2611 102.8 20.0 0.79 34.0 1.34 26.0 1.02
3000 118.1 5093 200.5 3916 154.2 30.0 1.18 51.0 2.00 39.0 1.54
4000 157.5 6772 266.6 5222 205.6 40.0 1.57 68.0 2.68 52.0 2.05