Ametek LANDSCAN LSP-HD - Storage Management - Station Tab Settings

Infrared Linescanning System
Installation Overview
Landscan LSP-HD
7 - 20
7.5.2 Station tab
1) OntheStationtab,selecttheStorage Mode. If Store Productsisselected,products
willbestoredautomaticallyassoonasdetectedbytheScanner.
2) In Storage Data Reductionachoiceofoptionsisavailabletoreducethesizeof
productles,e.g.
• Product Reduction
• Line Reduction
• Sample Reduction
3) ActivateStorage EnabledforeachStation.StoragewillstartassoonasSystem
StorageisactivatedontheGeneral tab.