Sequoia / Tahoe Series User Manual California Instruments
116 M447352-01 REV-A
Figure 5-24. Frequency settings
CURRENT LIMIT Programs the output current in RMS value, A(RMS). The default
is full-scale for the model.
Figure 5-25. Current Limit Settings
PHASE Programs the phase angle of the output voltage in a standalone
unit operating in a 1-Phase configuration; the phase angle would
be with respect to the external SYNC signal. In an auxiliary unit
(with LKS option) of a multi-phase group, the phase angle would
be with respect to Phase-A, while Phase-A would be the
reference at 0°. If the clock source is selected to be internal, this
parameter has no effect. The default is zero.
In a 3-Phase configuration, the Phase-A phase angle reference
is set to default 0° and allows to program the of Phase-B and
Phase-C with respect to the Phase-A reference.
To Next Page
Loading...
