Sequoia / Tahoe Series User Manual California Instruments
150 M447352-01 REV-A
Figure 5-79. Clock Mode Settings
OUTPUT SENSE Selects the point for the sensing of the output voltage for
regulation; the default is external:
Internal: Local, at the rear panel terminals.
External: Remote, through the Remote Sense connection to the
load.
Figure 5-80. Output Sense Settings
DEFAULT SCREEN Selects whether the Default screen (showing only voltage and
current amplitude) is enabled and configures its operational
characteristics; the defaults are Default screen enabled, 10-
second timeout.
Timeout Interval: Select the time, in seconds, for how long a
screen must be inactive for the Default screen to be displayed.
To Next Page
Loading...
