Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 175
1. Tapping the OUTPUT PROGRAM screen on the HOME Screen of the front panel touch-screen.
2. Scrolling to the OUTPUT PROGRAM screen with the encoder and depressing the encoder switch.
The UP arrow button will return to the previously selected screen menu (in this case the HOME Screen).
The HOME button will return to the HOME screen that has the top-level menu for the sub-menu being
displayed; for the OUTPUT PROGRAM screen top-level menu, is the HOME Screen.
Figure 5-126. OUTPUT PROGRAM Screen Top-Level Menu
The following choices are available in the OUTPUT PROGRAM screen top-level menu. Functions that
accept a numeric value require that the value is within the allowed range, otherwise, an error will be
generated, and the value will not be accepted.:
Entry Description
Settings
CURRENT LIMIT Programs the current, required as a load for the UUT.
Figure 5-127. Current Limit Settings
PHASE SHIFT Programs the phase shift values required as a load for the UUT.
To Next Page
Loading...
