Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 187
Figure 5-147. Mode Settings
ALC Selects how the output voltage will be regulated; the default is
ALC on:
ON: The RMS digital regulator is enabled, and shutdown will be
executed if a loss of regulation occurs.
OFF: Regulation of the output voltage does not utilize the RMS
digital regulator, and shutdown that is dependent on regulation
would not occur.
Regulate: The RMS digital regulator is enabled, but shutdown
will not be executed if loss of regulation occurs.
Figure 5-148. ALC Settings
PROFILES Selects the operational state of the power source; the default is
Profile-0. Up to 15 unique profiles, including transient lists, could
be stored; Subsequently, a profile could be loaded to
automatically set the unit to that configuration. To save the
present state, tap on the profile selection button. The profile could
be given an alphanumeric identifier by using the Name function;
Tap the SAVE field to store the present configuration. Tap on the
Load field to recall a configuration and set the power source to
that state.
Figure 5-149. CONFIGURATION Menu, PROFILES Sub-Menu
To Next Page
Loading...
