Sequoia / Tahoe Series User Manual California Instruments
198 M447352-01 REV-A
Figure 5-172. Reactive Power Settings
5.9.6 Configuration Screen
The CONFIGURATION screen provides a setup of the output mode of operation, power-on states,
operation profiles, parameter limits, and selection of clock mode.
The top-level menu of the CONFIGURATION screen is shown in Figure 5-173. It can be reached in one
of two ways:
1. Tapping CONFIGURATION on the HOME Screen of the front panel touch-screen.
2. Scrolling to CONFIGURATION with the encoder and depressing the encoder switch.
The UP arrow button will return to the previously selected screen menu (in this case the HOME Screen).
The HOME button will return to the HOME screen that has the top-level menu for the sub-menu being
displayed; for the CONFIGURATION screen top-level menu, is the HOME Screen.
Figure 5-173. CONFIGURATION Screen Top-Level Menu
The following sub-menus are available in the CONFIGURATION menu:
Entry Description
SYNC SETTINGS Programs the Sync Voltage, Sync Phase of each output phase,
and Sync Freq.
To Next Page
Loading...
