Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 213
Figure 5-202. Sync Settings
VOLTAGE PROTECTION Programs the Voltage Protection threshold for the output
voltage of each output phase. Exceeding the OVP threshold will
result in the shutdown of the output, with the output isolation relay
opened and the output voltage programmed to zero. The
maximum OVP setpoint is 115% of full-scale low-range/high-
range output voltage: AC- mode, 191V/383V;
DC-mode, 253V/506V. The default value is 115% of full-scale.
Figure 5-203. Voltage Protection Settings
PHASE NUMBER Programs the output phase configuration: One-Phase or
Three-Phase. The default is Three-Phase.
Figure 5-204. Phase Number Settings
To Next Page
Loading...
