Sequoia / Tahoe Series User Manual California Instruments
M447352-01 REV-A 235
Figure 5-249. LAN Config
Gateway Address: Sets the gateway address when DHCP is turned off in the LAN
CONFIG sub-menu; when AUTO IP is selected, set the gateway
address to all zeros so that the gateway address would be
requested from the network; when DHCP is selected, the
gateway address is assigned by the network DHCP server.
Figure 5-250. Gateway Address
Port: Sets the port number; the factory-default value is 5025.
Figure 5-251. Port
MAC Address: Displays the MAC address; the MAC address is listed on a label
on the chassis of the unit.
To Next Page
Loading...
