Sequoia / Tahoe Series User Manual California Instruments
70 M447352-01 REV-A
Table 3-28: LAN Interface Connector Type
Pin # Ethernet Signal EIA/TIA 568A
EIA/TIA 568B
Crossover
1 Transmit/Receive Data 0 + White with green stripe White with orange stripe
2 Transmit/Receive Data 0 - Green with white stripe or
solid green
Orange with white stripe or
solid orange
3 Transmit/Receive Data 1 + White with orange stripe White with green stripe
4 Transmit/Receive Data 2 + Blue with white stripe or
solid blue
Blue with white stripe or
solid blue
5 Transmit/Receive Data 2 - White with blue stripe White with blue stripe
6 Transmit/Receive Data 1 - Orange with white stripe or
solid orange
Green with white stripe or
solid green
7 Transmit/Receive Data 3 + White with brown stripe or
solid brown
White with brown stripe or
solid brown
8 Transmit/Receive Data 3 - Brown with white stripe or
solid brown
Brown with white stripe or
solid brown
Table 3-29: LAN Interface 8P8C Modular Connector Pinout
3.8.11 GPIB interface (Optional)
A GPIB connector is located on the rear panel for remote control; refer to Figure 3-23 for rear view of
connector, Table 3-30 for connector type and Table 3-31 for pin descriptions.
Figure 3-23: GPIB interface Connector
Connector Type
GPIB Interface
PCB D-Sub Connectors, Receptacle, Cable-to-Board, 24 Position
TE Connectivity P/N: 5554923-1
Table 3-30: GPIB Interface Connector Type
Pin # GPIB Signal Description
1 DIO1 Data Input/ Output bit
2 DIO2 Data Input/ Output bit
3 DIO3 Data Input/ Output bit
4 DIO4 Data Input/ Output bit
To Next Page
Loading...
