Why does my AMF-BRUNS EURO RAMP ramp make noises when driving?
If your AMF-BRUNS Mobility Aid ramp is making noise while driving, the ramp fastenings may have become loose. Try tightening the star grips and ensure the floor mounting bracket is tightly secured to the vehicle. Also, the locking lever mechanism might be maladjusted or loose, so readjust or tighten the mechanism.
What to do if AMF-BRUNS Mobility Aid ramp can only be operated using excessive force?
If your AMF-BRUNS Mobility Aid ramp requires excessive force to operate, one or more of the gas-operated springs may be defective. Replace the gas-operated spring(s) as necessary.
How to fix AMF-BRUNS Mobility Aid ramp that can not be locked in the vertical position?
If your AMF-BRUNS Mobility Aid ramp cannot be locked in the vertical position, it could be due to dirty ramp or latch locks. Clean the components. Alternatively, the latch locks may be maladjusted or defective, in which case you should check, adjust, or replace them as necessary.
General| Brand | AMF-BRUNS |
|---|---|
| Model | EURO RAMP |
| Category | Mobility Aid |
| Language | English |
To Next Page