Do you have a question about the AMF 115 and is the answer not in the manual?
Tips for safe operation, including riding in adverse conditions and personal protection.
Detailed specifications of the moped's dimensions and components.
Data on braking performance under various conditions.
Instructions for unpacking the moped and preparing for assembly.
Guide for assembling the handlebars and steering stem.
General guidance on operating the moped.
Step-by-step instructions for starting the moped's engine.
Procedure for safely stopping the moped.
Instructions on how to turn off the moped's engine.
General advice on maintenance procedures and when to seek service.
Proper methods for cleaning the moped to maintain its condition.
A schedule outlining periodic maintenance tasks and frequencies.
Note on when adjustments are needed beyond periodic checks.
How to check for play in the head bearings and adjust steering tension.
Procedure for checking and adjusting crank bearings for smooth operation.
Instructions for inspecting brake shoes for wear and replacement needs.
Detailed steps for fine-tuning front and rear brake adjustments.
Guide on how to properly adjust the drive chain tension.
Steps for correctly installing the front wheel onto the moped.
Instructions for mounting the rear wheel onto the moped.
Steps for removing tires from the rim.
Procedure for installing tires onto the rim.
Guidance on proper tire inflation pressure.
Information on preventing tire and tube damage.
How to ensure the rear wheel is centered within the frame.
Procedure to adjust engine drive roller alignment with the tire.
Explanation of the alternator's function and power supply.
Details on how the headlight and taillight operate and their connection.
Information on the brakelight's operation and its series connection.
The purpose and function of the resistor in the electrical system.
Explanation of the horn's connection and operation.
AMF's role in repairing or replacing defective moped parts.
Consumer's duties for warranty claims, including notification and part return.
Loading...