Amica BOC4512 User Manual

12
OPERATION
The electronic prgrammer Ts is
equippedwithelectronicsensorswhich
are switched on by touching or press-
ing the sensor surface for at least one
second.
Each sensorreaction is conrmedby
the beep.Keep the sensor surface clean
at all times.
Important!
Inovensequippedwith the electronic
programmer Ts, the time “0.00” will
startashinginthedisplayeldupon
connection to the power supply.
The programmer should be set with
the current time. (See Electronic
programmer ). If the current time
is not set operation of the oven is
impossible.
Before using the oven for the rst time
 Remove packaging, clean the interior of
the oven and the hob.
 Takeoutandwashtheoventtingswith
warmwaterandalittlewashing–upliq-
uid.
 Switch on the ventillation in the room or
open a window.
 Heat the oven (to a temperature of 250°C,
for approx. 30 min.), remove any stains
and wash carefully; the heating zones
of the hob should be heated for around
4 min. without a pan.
The oven is equipped with a retractable
knobs. In order to select a function do the
following:
1. Gently press and release a knob which
will pop out,
2. Turn the oven functions selection knob to
the desired function.
Symbols printed around the knob indicate
available oven functions.
1
2

Amica BOC4512 Specifications

General

Brand	Amica
Model	BOC4512
Category	Oven
Language	English