Amica DFV41E6AISMG - AUTOMATIC FAULT WARNINGS AND WHAT TO DO

- 24 -
AUTOMATIC FAULT
WARNINGS AND WHAT TO DO
TROUBLE
CODE
POSSIBLE FAULT WHAT TO DO
FF
Water inlet system fail-
ure
Make sure the water inlet
tap is open and water is
owing.
Separate the inlet hose
from the tap and clean the
lter of the hose.
Contact for service if the
error continues.
F5 Pressure system failure Contact for service.
F3 Continuous water input
Close the tap and contact
for service.
F2
Inability to discharge
water
Water discharge hose and
lters may be clogged.
Cancel the program.
If the error continues, con-
tact for service.
F8 Heater error Contact for service.
F1 Overow
Unplug the machine and
close the tap.
Contact for service.
FE Faulty electronic card Contact for service.
F7 Overheating Contact for service.
F9 Divisor position error Contact for service.
F6 Faulty heater sensor Contact for service.
HI High voltage failure Contact for service.
LO Low voltage failure Contact for service.