24
OPERATION
After the work end time is reached, the oven
will turn off automatically, the sound signal will
turn on and the lamp at
will ash again,
• set up the oven function and temperature
control knobs in turn-off po sitions,
• press buttons 1, 2 or 3 to turn the signal
off; the lamp will go out, and the display will
in di cate the current time.
Notice!
You can check and correct pro grammed
set-ups at any time. You can not, how ever,
change the current time set-ups when the
programmer is in the semi-automatic or au-
tomatic op erations.
To Next Page
Loading...
