15
PREPARE THE APPLIANCE FOR OPERATION
Water
hardness
German
degrees [dH]
French
degrees [dF]
British
degrees [dE]
Water hardness level
indicator
Salt consump-
tion [g/cycle]
1 0~5 0~9 0~6 H1 0
2 6-11 10-20 7-14 H2 9
3 12-17 21-30 15-21 H3 12
4 18-22 31-40 22-28 H4 20
5 23-34 41-60 29-42 H5 30
6 35-55 61-98 43-69 H6 60
If the water hardness is higher than the maximum values given in the table above, or if you use water
from a deep well, it is recommended to use lters and water treatment equipment.
NOTE: The factory settings are for the water hardness level 3.
Water hardness table
The use of detergents
Use a detergent for domestic dishwashers.
On the market you can nd detergent in-
tended for dishwashers in the form of pow-
der, gel and tablets. The detergent must be
placed in the dispenser before starting the
dishwasher. Store detergent in a cool and
dry place, out of reach of children.
Do not overll the detergent dispenser,
otherwise the detergent may not dissolve
completely and leave streaks on the
dishes.
If you need more information on the deter-
gent used, please contact the manufac-
turer directly.
1. Switch on the appliance;
2. Press the Start/Pause button for more than
3 seconds to start the water softener set model
within 60seconds after the appliance was
switched on;
3. Press the Start/Pause button to select the
proper set according to your local environment, the
sets will change in the following sequence:
H1->H2->H3->H4->H5->H6;
4. Press the Power button button to end the set up
model.
1 2
To Next Page
Loading...
Need help?
General
