EasyManuals Logo

Amica SHC Series User Manual

Amica SHC Series
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
OPERATION
Setting the time
After connection to the mains or reconnection
after a power cut the display shows ash 0.00:
Press button 1, then the display will show
,
set the time using buttons < / >.
7 seconds after the time has been set the
new data will be saved.
Caution!
If the correct time is not set then proper ope-
ration of the oven is not possible.
Timer
The timer can be activated at any time, re-
gardless of the status of other functions. The
timer can be set for from 1 minute to up to 23
hours and 59 minutes.
To set the timer you should:
Press button OK, then the display will show
ashing ,
set the timer using buttons < / >.
The time set is shown on the display and the
signal function is on.
Press button OK, < or > in order to switch
o󰀨 the signal, the signal function will go
out and the display will show the current
time.
Caution!
If the alarm signal is not turned o󰀨 manually,
it will be turned o󰀨 automatically after approx.
7 minutes.
Semi–automatic operation
If the oven is to be switched o󰀨 at a given
time, then you should:
Set the oven function knob and the tem-
perature regulator knob to the setting at
which you want the oven to operate.
Press button OK until the display will show:
Set the required time using buttons < / >,
within a range from 1 minute to 10 hours.
The set time will be introduced to the memory
after approx. 7 seconds and the display will
show AUTO function.
When the set time has passed the oven is
switched o󰀨 automatically, the alarm signal
is activated and the signal function AUTO
ashing again;
Set the oven function knob and the tempe-
rature regulator knob to the switched–o󰀨
position.
Press button OK, < or > in order to switch
o󰀨 the signal; the signal function will go
out and the display will show the current
time.
Caution!
In ovens equipped with one control knob,
the oven function knob is integrated with the
temperature regulator knob.
OK
OK - button to select mode of operation
> - plus button
< - minus button
- appliance on indicator
- Minute minder
- Duration
Operate the control panel*
*optional

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Amica SHC Series and is the answer not in the manual?

Amica SHC Series Specifications

General IconGeneral
Hob typeGas
Number of Burners4
Oven TypeGas
Energy efficiency classA
MaterialStainless Steel
Ignition TypeAutomatic
Gas TypeNatural Gas / LPG
Dimensions (WxDxH)60 x 60 x 85 cm

Related product manuals