19
OPERATION
Automatic operation
If the oven is to be switched on for a specied
period of time and switched o at a xed hour
then you should set the operation time and
the operation end time:
Press button OK until the display will show:
Set the required time using the buttons
< / > within a range from 1 minute to 10
hours.
Press button OK until the display will show:
Set the switch–o time (operation end
time) using buttons < / >, which is limited
to a period of 23 hours and 59 minutes
from the current time.
Set the oven function knob and the tem-
perature regulator knob to the setting at
which you want the oven to operate.
The function AUTO is now on; the oven will
start operating from the point when the die-
rence between the set operation end time and
the operation duration time occurs (e.g. the
operation time is set to 1 hour, the operation
end time is set to 14.00, so the oven will start
working automatically at 13.00).
When the oven reaches the operation end
time it will switch o automatically, the alarm
will be activated and the function AUTO will
start ashing again.
Set the oven function knob and the tempe-
rature regulator knob to the switched–o
position.
Press button OK, < or > in order to switch
o the alarm; the function AUTO will go
out and the display will show the current
time.
Cancel settings
Timer and automatic function settings may
be cancelled at any time.
Cancel automatic function settings:
press buttons < / > simultaneously,
Cancel timer settings:
press button OK to select timer settings,
press buttons < / > again,
Change the timer beeps
The tone of the timer beeps may be chan-
ged as follows:
press buttons < / > simultaneously,
select “tone” function with the OK button,
the display panel will start to blink:
with the < button press the appropriate
buttons from 1 to 3 to select the option
you wish.
To Next Page
Loading...
Need help?
General
