Fuse Replacement Instructions
A Fuse protects the wiring and battery in the event of a short circuit. If your Amigo stops abruptly, check the Fuse.
If it has “blown,” check for overloads or short circuits.
The Fuse is located on the Battery Case. To replace the Fuse:
• Remove the Fuse from its Socket. Inspect for continuity (“blown”)
• If blown, replace with the same style and size (Automotive style 20 AMP)
Battery Replacement
NOTE: Replacement Battery must meet passenger and cargo aircraft travel requirements.
• Remove four Screws as shown and remove Battery Front Cover.
• Remove the Black Wire from each Battery.
• Lift each Battery far enough to expose the Red Wire Connection and remove it from each Battery.
• Reverse this sequence to install Batteries.
NOTE: Tampering with electrical or mechanical parts will invalidate your warranty.
12
To Next Page
Loading...
