24 ASC 70 / 90 / 100 / 110 / 130 / 150 / 200 / 250
2. Safety precautions
PARK MACHINE SAFELY
Before working on the machine:
Park machine on a level surface.
-
Lower bucket to the ground.
-
Move turret swing lever to lock position.
-
Run engine at slow idle speed without load for 3 minu-
-
tes.
Turn key switch to OFF to stop engine. Remove key from
-
switch.
Pull pilot control shut-o lever to LOCK position.
-
Allow engine to cool.
-
Close windows, roof window, and cab door.
-
Lock all access doors and compartments.
-
NEVER WORK UNDER PROJECTING BANKS
The edges could collapse o a land slide could occur causing seri-
ous injury or death.
PROVIDE SIGNALS FOR JOBS INVOLVING A NUMBER OF MA-
CHINES
For jobs involving several machines, provide signals commonly
known by all personnel involved.
Also, appoint a signal person to co-ordinate the job site.
Make sure that all personnel obey the signal person’s direc-
tions.
MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
To Next Page
Loading...
