25ASC 70 / 90 / 100 / 110 / 130 / 150 / 200 / 250
WORKSHOP MANUAL
KEEP PERSONNEL CLEAR FROM WORKING AREA
A person may be hit severely by the swinging front attachment
or counterweight and/or may be crushed against an other ob-
ject, resulting in serious injury or death.
Keep all persons clear from the area of operation and machine
movement.
Before operating the machine, set up barriers to the sides and
rear area of the bucket swing radius to prevent anyone from en-
tering the work area.
SAFETY TRANSPORTING
The danger of tipping is present when loading/unloading the
machine onto/from a truck or trailer bed.
Be sure to observe local regulations when transporting
-
the machine on public roads.
Provide an appropriate truck or trailer for transporting
-
the machine.
Take the following precautions when loading/unloading the
machine:
Select rm level ground.
-
Be sure t use a loading dock or ramp.
-
Be sure to have a signal person when loading/unloading
-
the machine.
Always select the slow speed mode with the travel spe-
-
ed selector.
Avoid steering while driving up or down the ramp as it is
-
extremely dangerous.
If steering is unavoidable, rst move back to the ground or at-
bed, modify travelling direction, and begin to drive again.
Operate the safety lever but do not operate any other
-
control except travel control when driving up or down
the ramp.
The top end of the ramp where it meets the atbed is a
-
sudden bump. Take care when traveling over it.
Securely fasten machine frame using chains or cables.
-
Refer to “Transport” chapter in this manual for details.
MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
To Next Page
Loading...
