27ASC 70 / 90 / 100 / 110 / 130 / 150 / 200 / 250
WORKSHOP MANUAL
WARN OTHERS OF SERVICE WORK
Unexpected machine movement can cause serious injury.
Before performing any work on the machine, apply the “Mainte-
nance in progress” tag (see SAFETY PLATES in this Chapter). This
tag can be applied to the left-hand control lever, safety lever or
cab door
CLEAN THE MACHINE REGULARLY
Remove any grease, oil or debris build-up to avoid possible in-
jury or machine damage.
Do not spray water or steam inside the cab.
STORE ATTACHMENTS SAFELY
Stored attachments as blades can fall and cause serious injury
or death.
Securely store attachments and implements to prevent them
from falling. Keep playing children and bystanders away from
storage area.
SUPPORT MACHINE PROPERLY
Never attempt to work on the machine without securing the
machine rst.
Always lower the attachment or tool to the ground before work-
ing on the machine.
If you must work on a lifted machine or attachment, securely
support the machine or attachment.
Do not support the machine on cinder blocks, bollow tires, or
props that may crumble under continuous load. Do not work
under a machine that is supported solely by a jack.
MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
To Next Page
Loading...
