22 ASC 70 / 90 / 100 / 110 / 130 / 150 / 200 / 250
2. Safety precautions
AVOID TIPPING
When operating on a slope, keep blade low to ground and close
to machine.
To avoid tipping:
Be extra careful before operating on a grade.
-
Prepare machine operating area at by grading.
-
Keep the blade low to the ground and close to the ma-
-
chine.
Reduce machine operating speed to avoid tipping or
-
slipping.
Never attempt to travel across a grade steeper than 15
-
degrees.
Be careful when working on frozen ground.
Temperature increases will cause the ground to b e - -
come soft and make ground travel unstable.
DRIVE MACHINE SAFELY
Before starting the machine, read carefully the “use and instruc-
tions manual” to get familiar with levers.
Before moving the machine, conrm which way to move ped-
als/levers for the corresponding direction you wish to go.
When traveling up or down a grade, keep the blade in the direc-
tion of travel, approximately 20 to 30 cm (A) above the ground.
BEWARE OF EXHAUST FUMES
Engine exhaust fumes can cause sickness or death.
If you must operate in a building, be sure there is adequate ven-
tilation.
Either use an exhaust pipe extension to remove the exhaust
fumes or open doors and windows to bring enough outside air
into the area.
MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
To Next Page
Loading...
