37
SAFETY PRECAUTIONS
EVACUATING IN CASE OF FIRE
If a fire breaks out, evacuate the machine in the following
way:
Stop the engine by turning the key-start switch to the
OFF position if there is time.
Use a fire extinguisher if there is time.
Exit the machine
USE TOOLS PROPERLY
Use tools appropriate to the work. Makeshift tools, parts,
and precedures cam create safety hazard.
Usare soltanto attrezzi appropriati per allentare elementi
filettati e di fissaggio.
Use power tolls onlyto losen threaded tools and
fasteners.
For loosening and tightening hardware, use the correct
size tools. Do not use U.S. measurementt tools on metric
fasteners. Avoid bodily injury caused by slipping
wrenches.
Use only recommended replacement parts. (See Parts
Catalog).
MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
To Next Page
Loading...
